RDS800 21U 650 Rack Data Street Cabinet

The RDS800 21U 650 can accommodate deeper rack mounted equipment. The rack cabinet is made from stainless steel suitable for outdoor use with a single door cabinet designed to an 800mm width with a fixed 19-inch rack with 21U rack space.

RDS800 21U 650 Rack Data Street Cabinet

The 21U 650mm deep Rack Cabinet has been designed with an extra depth of 650mm.

The RDS800 21U 650 can accommodate deeper rack mounted equipment. The rack cabinet is made from stainless steel suitable for outdoor use with a single door cabinet designed to an 800mm width with a fixed 19-inch rack with 21U rack space.

As standard, the cabinet is locked with a three-point locking mechanism operated by a padlock handle covered with a padlock shroud for added security. Includes a backboard and louvre vents on the side of the doors for adequate cabinet ventilation.

The cabinet can be supplied without vents if required, however, this will affect the cost and lead times. Please enquire further if you require this or any other modification.

 Key Features:

  • Extra-depth for larger rack mounted equipment
  • Fixed 19-inch 21U rack (option for swing rack available)
  • Full perimeter door seal to IP46
  • Louvre vents, top and bottom on both sides as standard for ventilation
  • Three-point locking mechanism operated by a padlocked L-handle, protected by a padlock shroud
  • 12mm exterior grade plywood backboard
  • Other lock options available (subject to metalwork modification)
  • Options to add temperature control (heater and fan kits)
  • Options to add light, electrical socket and consumer unit
  • Optional plinth (recommended)

Product Dimensions

Product CodeProduct Dimensions
(h x w x d, mm)
Backboard
(h x w, mm)
Working Depth
(mm)
RDS800 21U 650ED1125 x 800 x 650930 x 745645

*Height above ground after installation onto corresponding plinth is 1175mm.

 

Product Documentation

  • Data Sheet
  • Technical Drawing
  • Instruction Sheet

Accessory Options

  • Optional Plinth (Recommended)
  • Heater & Fan Kits
  • LED Light
  • Electrical Sockets
  • Consumer Unit

Modification Options

  • Access Panels
  • Cable Entry Holes
  • Alternative Locking Systems (subject to metalwork modification)
  • Removal of Louvre Vents (subject to metalwork modification)

Material Options

  • 4003 Grade Stainless Steel: Suitable for inland locations
  • 304 Grade Stainless Steel: Suitable for inland & coastal (<1 mile from coastline)
  • 316 Grade Stainless Steel: Suitable for coastline locations

Colour Options

  • RAL 9005 Black Gloss
  • BS4800 14C40 Dark Green Gloss
  • BS381C 631 Light Grey Gloss
  • BS381C 632 Dark Grey Gloss
  • Natural Finish* (304 & 316 Grades only)

Hello, we’re testing some new features. This is the Info block.

TOP

Make an enquiry

Contact Info