Key Features
- Designed to house meters, distribution boards and other electrical equipment rated up to approximately 100 A, or 60 to 70 kVA, depending on the DNO.
- Not intended to house a CT chamber.
- Separate segregated lockable compartments for BNO and DNO.
- Louvres at top and bottom sides of cabinet for ventilation. Can be manufactured without louvres if a higher IP rating is required.
- IP24 rating for models with ventilation louvres.
- IP46 rating for models without ventilation louvres.
- IK10 Impact rating.
- Fully sealed door aperture.
- Two tri-key camlocks top and bottom, and one central staple with padlock shroud on each door.
- 30° peaked roof on a 2° slope down away from the door.
- Available in three grades of stainless steel.
- Smooth polyester powder coated finish.
- 12mm Plywood Backboard included in each compartment.
- Earthing studs fitted to both body and door.
- Optional plinth to be installed into the ground before attaching the cabinet for increased stability.
- Optional accessories for the protection of electrical and electronic equipment.
- Detachable lifting brackets.
Design Approved by SP/ENW as alternative to brick housing.
