External Electrical Enclosures – RB Range
Key Features
- Louvres at top and bottom sides of cabinet for ventilation. Can be manufactured without louvres if a higher IP rating is required.
- IP24 rating for models with ventilation louvres. IP46 rating for models without ventilation louvres. Read our guide on IP Ratings.
- IK10 rating for all models.
- Discreet hinge system enables 180° door opening.
- Fully sealed door aperture.
- Tri Key Camlock(s) as standard. Other lock options available, see Options Tab.
- Watershed top (2° roof slope to the back of the feeder pillar).
- Available in three grades of Stainless Steel.
- Smooth polyester powder coated finish.
- 12mm Plywood Backboard included.
- Earthing studs fitted to both body and door.
- Optional Plinth to be installed into the ground before attaching the cabinet for increased stability.
- Optional Accessories for the protection of electrical and electronic equipment.
RB Cabinet Range – Single Door Feeder Pillar & Double Door Feeder Pillars
The smaller RB Cabinets (RB460, RB600, RB800, RB1000) are single door feeder pillars, whereas the larger cabinets (RB1250, RB1550) are two door feeder pillars. All models are supplied with 2 x 8mm Tri-Key Camlocks. The cabinet roof is sloped down at 2 degrees away from the door. The RB Cabinet Range has been tested to BS EN 62208: 2011 and is CE certified according to the Low Voltage Directive 2006/95/EC (2016).
The RB Range of external electrical enclosures is a highly customisable range, made even better with the addition of RB Accessories. These optional extras include shelves, document pockets, access panels, cable entry holes, 19” rack (except RB460), extra/filtered ventilation, cooling fans, light, tubular heater and consumer unit. See the Options Tab for a full list.
Height above ground after installation onto corresponding plinth is 1175mm.
Alternative sizes
As we manufacture our stainless steel enclosures ourselves, we can adapt our cabinet designs to whatever dimensions you need. Please get in touch if you want to discuss custom sizes. Non-standard and custom sizes may be subject to minimum order quantities and longer lead times.
RB Cabinet Applications
Initially designed for the street lighting sector in mind, these multipurpose electrical enclosures have many use cases. Made from durable Stainless Steel and powder coated at no extra cost, RB Cabinets are perfect for:
- Utilities: New connections and power supply upgrades, as Metering Cabinets or Service Cabinets.
- Highways: Perfect for holding communications equipment for ITS Intelligent Transport Systems.
- Traffic Signals: Providing power to the signals that direct vehicle and pedestrian movement.
- Street Lighting: Supplying electricity to streetlamps for visibility and safety.
- CCTV and ANPR: Perfect for powering CCTV and ANPR for security systems and car parks.
- Electric Vehicle (EV) Charging: Powering EV charging points along roadsides.
